Protection
Full-wrap In-Mold construction adds a second PC shell for a clean look and additional strength in the helmet’s bottom rim.
In-Mold Construction is a technique that connects the shock absorbing EPS liner directly to the polycarbonate shells to create a lightweight and strong structure. In the first step, the flat PC sheet is heated and deep-drawn over the helmet mold. Then the outline of the helmet shell and the holes are milled out. This PC shell is then placed in the helmet mold and the anchors for straps and fitting systems are placed. Then the mold will be closed, and the EPS is injected. Now the polycarbonate shell bonds with the EPS and a super light, yet extremely stable helmet is created.
Full-wrap In-Mold construction adds a second PC shell for a clean look and additional strength in the helmet’s bottom rim.
MIPS® is a low friction layer inside the helmet, which allows the head to rotate relative to the helmet in an angled impact. This reduces rotational violence and potential damage to the brain.
US-American bike helmet standard
Fit
The Dial-Fit System makes it easy to dial in a custom fit in seconds. An adjustment wheel on the back of the helmet ensures size adjustment and increases stability for helmets that do not have our Snug Fit. Some of our mountain bike enduro/trail helmets also come with a height-adjustable Dial Fit System.
Our Tuned Fit System allows a rider to dial in their fit using different thickness pads on the interior of the helmet. Our helmets always come with two sizes of pads. Each size comes in a different color which makes it easy to determine the right pads to fit the helmet to the head. It is very important to adjust the helmet with these included pads. For example, if necessary, the slightly thicker pads can be mounted on the back of the head and the pad for the front of the head can be thinner, or vice versa.
A helmet can only protect what it covers. Our Low Fit design sits low and fully protects the entire back and sides of your head without impairing field of vision or restricting movement.
Comfort
Our innovative Air Flow vent system delivers optimal air circulation and reduces uncomfortable heat build-up in the helmet. The air channels have been designed to pull fresh air over and around the head while forcing stale air out.
Tool-free, bolt-on adjustable visor for custom height placement
| use it for: | trail/all-mountain, roller derby, wakeboard, |
| Certification: | NF EN 1078+A1:02 2013, CPSC, UKCA |
| Weight: | 400 g |
| Material: | Polycarbonate, EPS, Polyester, Nylon |
| Article No.: | 750618-35-034 |
