TSG / Helmets / konik 2.0 solid color
konik 2.0 solid color
zoom_in zoom_out

konik 2.0

solid color
konik 2.0
Enable Cookies to start shopping
The Konik 2.0 helmet was made for slope racers and freeriders who like to keep control. A clever, active ventilation system ensures draught-free ventilation and gives complete vent control in all conditions. This light in-mold helmet also has a removable, washable comfort liner. The Konik 2.0 is size adjustable via the TSG dial-fit system to make it suitable for all winter sport enthusiasts. Gears up great with our Goggle One, Goggle Two or Goggle Four.
View all models Available


Full wrap In-mold

Full-wrap In-Mold construction adds a second PC shell for a clean look and additional strength in the helmet’s bottom rim.

In-Mold construction

In-Mold Construction is a technique that connects the shock absorbing EPS liner directly to the polycarbonate shells to create a lightweight and strong structure. In the first step, the flat PC sheet is heated and deep-drawn over the helmet mold. Then the outline of the helmet shell and the holes are milled out. This PC shell is then placed in the helmet mold and the anchors for straps and fitting systems are placed. Then the mold will be closed, and the EPS is injected. Now the polycarbonate shell bonds with the EPS and a super light, yet extremely stable helmet is created.

EN 1077 B

ASTM 2040


Dial Fit System

The Dial-Fit System makes it easy to dial in a custom fit in seconds. An adjustment wheel on the back of the helmet ensures size adjustment and in­creases stability for helmets that do not have our Snug Fit. Some of our mountain bike enduro/trail helmets also come with a height-adjustable Dial Fit System.

Low Fit

A helmet can only protect what it covers. Our Low Fit design sits low and fully protects the entire back and sides of your head without impairing field of vision or restricting movement.


Closable ventilation

Air Flow Channels

Our innovative Air Flow vent system delivers optimal air circulation and reduces uncomfortable heat build-up in the helmet. The air channels have been designed to pull fresh air over and around the head while forcing stale air out.

Front goggle vents

Coated Front Rim

A protective layer of PC is bonded to the front foam for a clean look and additional strength in the helmet’s bottom rim.

Full-lining pad

Removable soft earpads abd neckroll

Goggle lock

Certification: NF EN 1077 12/2007 B, ASTM 2040:2018
Weight: 500 g
Material: Polycarbonate, ABS, EPS, Polyester, Nylon
Article No.: 791500-55-147
Head Circumference
54-56 cm
57-59 cm