Hardshell helmets are constructed from ABS or PP plastic. This outer shell gets bonded to the EPS core for a two-piece construction that provides high durability and ultimate high-impact protection.

Hardshell covered pads reduce friction against the ground in case of a fall. Maximum protection from impacts often associated with pedals, rocks and other objects found on varied terrain or falls from great heights on concrete or wooden ramps.

In-Mold Construction is a technique that connects the shock absorbing EPS liner directly to the polycarbonate shells to create a lightweight and strong structure. In the first step, the flat PC sheet is heated and deep-drawn over the helmet mold. Then the outline of the helmet shell and the holes are milled out. This PC shell is then placed in the helmet mold and the anchors for straps and fitting systems are placed. Then the mold will be closed, and the EPS is injected. Now the polycarbonate shell bonds with the EPS and a super light, yet extremely stable helmet is created.

MIPS® is a low friction layer inside the helmet, which allows the head to rotate relative to the helmet in an angled impact. This reduces rotational violence and potential damage to the brain.

We design our helmets differently from our competitors. We have analyzed the most diverse heads and determined a basic anatomical shape. This allows us to follow exactly the curves of the human head shape. You can see this very well when you look at a TSG helmet from the front: The sides of the helmet shell have more curvature and go clearly inwards. The outline of the TSG helmets at the sides and at the back is round and not straight down like with other helmets. With this production we achieve a so-called contact ring inside the helmet. Here the head touches the helmet all around.

We call this the TSG Snug Fit. Beside the better fit, our helmets with Snug Fit also look less bulky.

In order to lift the TSG helmet from the head, more power is needed than with competition models. This is important so that the helmet does not slip during use and above all remains in the correct position even in the event of a fall.

A helmet can only protect what it covers. Our Low Fit design sits low and fully protects the entire back and sides of your head without impairing field of vision or restricting movement.

Our Tuned Fit System allows a rider to dial in their fit using different thickness pads on the interior of the helmet. Our helmets always come with two sizes of pads. Each size comes in a different color which makes it easy to determine the right pads to fit the helmet to the head. It is very important to adjust the helmet with these included pads. For example, if necessary, the slightly thicker pads can be mounted on the back of the head and the pad for the front of the head can be thinner, or vice versa.

The Dial-Fit System makes it easy to dial in a custom fit in seconds. An adjustment wheel on the back of the helmet ensures size adjustment and in­creases stability for helmets that do not have our Snug Fit. Some of our mountain bike enduro/trail helmets also come with a height-adjustable Dial Fit System.

Our innovative Air Flow vent system delivers optimal air circulation and reduces uncomfortable heat build-up in the helmet. The air channels have been designed to pull fresh air over and around the head while forcing stale air out.

Channels between the EPS foam segments in our FlexTech instant fit helmets allow heat to rise and are then pulled out of the shell.

Mesh protected vents block insects.

Premium heat-sealed padding that is pre-formed and quick-drying: Removable and machine (hand) washable.

Light, interior fit pads: Removable and hand washable.

Softshell look and feel but Hardshell performance. A thin and flexible pierce-proof insert inside the pad on top of the multi-impact soft foam secures the foam and your joints from crushed rocks or other sharp objects. Your choice when you want comfortable soft but reliable impact protection. (Insert removable for some products).

Soft foam protection for the softest and most flexible performance. Your choice when you prefer wearing the most comfortable pad but still want reliable support

ACF Impact Foam is engineered to mimic the physical structure of human cartilage with molecular freeflow technology. Flexible and soft in the normal state but when met with impact the molecules in ACF form a hard, protective shell. The remaining impact energy is converted into barely noticeable heat before it can reach the body.

EVA provides great shock absorbing properties, stress-crack resistance and low-temperature toughness. It can be used in multi layers and backed with hard shell caps for a solid performance.

This smart PU foam gives you a great level of comfort and safety. It absorbs impact, is comfortable and soft to wear and adapts to create an individual fit.

High impact strength and low friction caps for use on rough and concrete ground.

Our custom Horseshoe shape that greatly surrounds knees, elbows or shoulders. The compression-moulded foam pad with a raised top part sits perfectly around your protected joints. This shape minimizes shifting and down-sliding to keep your pad in place during action.

Our pre-shaped body protection comes with a pre-bended articulated design for unrestricting wearing comfort and superior fit.

Ariaprene is breathable, light weight and durable. Air can circulate, the skin can breathe and moisture is reduced.

Very strong and at the same time flexible over a wide temperature range, Neoprene offers great temperature regulation and shock absorbing qualities. Perforated for breathability.

Spandex is used for a thin and low-profile design, easy usability and a flexible and comfortable wearing experience.

A NBR neoprene stripe at the inner top of the pad supports an anti-slip fit, keeping the pad in place during action.

Silicone lamination inside top cuff to keep protector in place.

A silicone print on the inside of the joint padding supports a slip-free fit and minimizes shifting

A thin and flexible pierce-proof insert inside the pad on top of the soft foam secures the foam and your joints from sharp objects. Insert removable for most products.

Strategically placed PU Powerband stripes, inspired by kinesiology tape, add strength to the lightweight material and significantly reduce movement when worn.

Strong abrasion-resistant fabric offers great resistance against wear and is used in areas prone to high abrasion. Extremely durable but still light and flexible.

The strap wraps around the whole limb offering superior fit adjustment, wearing comfort and protection.

No shoe removal needed. Accessible open-back design with comfortable neoprene butterfly velcro closure for easy on and off.

Buckled straps allow great size fine adjustment

A flap with double-layered Velcro firmly locks the end of the strap to avoid straps sticking out.

Lateral stretch mesh gussets ensure better fit, ventilation and flexibility. The pad stays in position and you perform better.

This three dimensionally structured fabric offers the optimal properties in ventilation and cushioning for the covers of padding and shoulder straps

Elastic and breathable mesh for best possible ventilation. Lightweight and stretchy fabric for additional freedom of movement

Foam padded side walls offer additional coverage.

No shoe removal needed. Accessible open-back design with comfortable neoprene butterfly Velcro closure for easy on and off.

Pull up and fix straps for the most secure and shift-free fit and wearing comfort.

TSG lenses offer a 100% UVA and UVB protection

Our spherical polycarbonate lens is curved and mimics the curvature of your eye to maximize your field of view. You experience distortion-free superior vision in all direction. Our dual lens configuration provides a thermal barrier between the cold outside temperatures and hot body temperatures from within. This thermal barrier prevents fogging in varying weather conditions.

Our cylindrical lens combines the optical quality of an injected lens and the classic low-profile styling found in a thermos formed lens. Curved horizontally while remaining flat vertically, our cylindrical lenses promote better optics by eliminating peripheral distortion.

An coating on the inside of the lens absorbs moisture immediately so you can enjoy clear lenses all day.

An anti-scratch coating on the outer lens acts as a protective layer, making the lens more durable and safe. Please note that the anti-scratch applies to the lens and not to the revo (chrome) coating.

Our Magnetic Quick Lens Change Technology with self-locating rare earth magnets embedded in the lens and frame allow for a fast, on-the-fly lens interchange. It features unsurpassed retention, coupled with convenient self-locating engagement.

Super easy and fast lens change system. Just click the lens on the frame to adapt to changing light and weather conditions.

Our frame is made of a flexible scratch resistant PU material that allows for maximum shape retention during low temperatures and varying weather conditions. In case of an impact, the frame spreads and absorbs some of the impact energy instead of transmitting it straight to the face.

The vent positioning keeps hot air circulating up and out slowly, reducing eye watering and lens fogging.

All day comfort of moisture wicking triple-layer fleece lined face foam. Enhances fit, comfort and performance.

The Silicone-printed strap provides added grip and superior helmet compatibility (dual-adjustable) to keep your goggles on your head.

Engineered to adjust to a full range of face shapes and sizes, the articulating outriggers evenly transfer pressure across brow and nose to ensure a complete seal against the face. When used with a helmet, the outrigger articulates allowing the goggle frame to sink into the helmet face port, providing a comfortable and consistent fit every time.

Our goggles are designed to perfectly fit with our helmets and a wide variety of other helmets for a comfortable fit for all day comfort. The inside of the goggle straps are silicone printed to make them stick to the helmet. This allows you to adjust the position of the goggle by placing the strap at a comfortable level.

Your goggle comes with two lenses for bluebird and bad weather conditions

Use it to store and clean your goggle.

Flexibility in all directions for maximum freedom of movement.

3-Point adjustable hood for a perfect fit.

Silicone printed inner waistband for a secure fit.

Coolmax® moves perspiration away from the body, and through the fabric, where it can evaporate quickly, allowing the wearer to feel cooler and more comfortable.

Hook and button for a double security.

Flatlock seams don’t chafe and offer higher strength.

A flexible, fast drying and breathable rib insert in the back yoke and/or crotch allow an easy movement and guaranties a comfortable fit when pedalling

Rough structured and tightly woven fabric that ensures maximum tear and abrasion resistance. Treated with a PU membrane it provides water and dirt repellence. A mesh lining makes it comfortable to wear.

A special treatment that enables the fabric to transport moisture to the outside and to dry faster.

Small reflective details and prints for additional visibility and safety.

Sanitized is a certified antibacterial fabric treatment to prevent bad odour from bacteria, mildew etc. in moist or sweaty environments.

Integrated micro fibre cloth to clean your sunglasses or goggles.

Small pocket for your lift ticket or other tiny things.

Stay fresh with soft mesh inserts for breathability and comfort.

Elastic mesh at waist or interior adjustable waistband for a comfortable fit.