Protection
Full-wrap In-Mold construction adds a second PC shell for a clean look and additional strength in the helmet’s bottom rim.
In-Mold Construction is a technique that connects the shock absorbing EPS liner directly to the polycarbonate shells to create a lightweight and strong structure. In the first step, the flat PC sheet is heated and deep-drawn over the helmet mold. Then the outline of the helmet shell and the holes are milled out. This PC shell is then placed in the helmet mold and the anchors for straps and fitting systems are placed. Then the mold will be closed, and the EPS is injected. Now the polycarbonate shell bonds with the EPS and a super light, yet extremely stable helmet is created.
Fit
The Dial-Fit System makes it easy to dial in a custom fit in seconds. An adjustment wheel on the back of the helmet ensures size adjustment and increases stability for helmets that do not have our Snug Fit. Some of our mountain bike enduro/trail helmets also come with a height-adjustable Dial Fit System.
A helmet can only protect what it covers. Our Low Fit design sits low and fully protects the entire back and sides of your head without impairing field of vision or restricting movement.
Comfort
Our innovative Air Flow vent system delivers optimal air circulation and reduces uncomfortable heat build-up in the helmet. The air channels have been designed to pull fresh air over and around the head while forcing stale air out.
Mesh protected vents block insects.
Easy to remove visor if you prefer riding without.
| use it for: | trail/all-mountain, roller derby, wakeboard, beginner, urban, |
| Certification: | NF EN 1078+A1:02 2013 |
| Weight: | 300 g |
| Material: | Polycarbonate, EPS, Polyester, Nylon |
| Article No.: | 750870-05-125 |
